How to share internet between 2 PC

It is my experience after trying various ways share internet between 2 PC, the way I think the most easy and quick to share internet between two PCs below. However, there are the conditions that:

    1. A computer has two LAN card (let's call it LAN 1 and LAN 2)

    2. A computer on the LAN 1 has been connected to the Internet via a modem and was able to be used for surfing the internet (ngenet)

    3. Computer B only need one LAN only (hereafter we call LAN 3)

    4. Computers A and B have been connected to the LAN cable types CROSS

As for how the connections are:
A computer on

1. Log start | Control Panel | Network Connections

2. Right-click the LAN 1 (which is connected to the internet modem) select the status tab support, note the IP Address, Subnet Mask and Default Gateway, for example:

IP Address: 192.168.1.2

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

*) Remember and take note! This is very important!

3. If it has been noted Close, now right click select properties 2 LAN

4. On the General tab select Internet Protocol (TCP / IP) and then select Properties

5. Set the IP addresses manually, enter the IP address use the Following the

IP Address: 192.168.1.3

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

To control the content of the

Prefered: 8.8.8.8

Alternate: 8.8.4.4

6. Once filled out correctly, click OK.

7. Go back to Go to start | Control Panel | Network Connections blocks 1 and LAN 2 LAN then right-click

8. Select the connection brigde

9. Wait until the connection is completed brigde

 On Computer B

1. Log start | Control Panel | Network Connections

2. Right-click the LAN 3 (a computer connected to LAN 2 A) select properties

3. On the General tab select Internet Protocol (TCP / IP) and then select Properties

4. Set the IP addresses manually, enter the IP address use the Following the

IP Address: 192.168.1.4

Subnet mask: 255.255.255.0

Default Gateway: 192.168.1.1

To control the content of the

Prefered: 8.8.8.8

Alternate: 8.8.4.4

6. Once filled out correctly, click OK.

7. Restart the computer

8. Congratulations you have two computers connected to the Internet both!

*) Warning: Notice the difference was no IP Address LAN 1, LAN 2, LAN 3 and Gateway (Have we all give a red color, different is not it? But it's not a rule of thumb, you can customize it)

6:12 PM | 0 comments | Read More

Monitoring Network Traffic with NetworkTrafficView

NetworkTrafficView is a free application from Nirsoft that allows users to monitor network traffic. This is a network monitoring tool that captures packets through your network adapter, and display general statistics about network traffic. NetworkTrafficView could help to find out all network traffic and check if there are malwares or spywares transmission of information to the internet. This application is supported on all versions of Windows, from Windows 2000 and up to Windows 7, including 64-bit.

properties NetworkTrafficView Traffic Monitor tools are grouped by type of Ethernet packets, IP Protocol, Source / Destination Address, and Source / Destination port. For each line of statistics, view the following information: Ethernet Type (IPv4, IPv6, ARP), IP protocol (TCP, UDP, ICMP), source address, Destination address, source port, destination port, Name Service (http, ftp, and etc.), packet count, number of packet size, amount of data, Size, Speed?? data, maximum speed?? data, average packet size, first / last packet Time, Duration, and the process ID / Name (For TCP connections).

You may need to select the network adapter to monitor traffic, make sure you run the tool in administrator mode to get the details.

NetworkTrafficView is a portable application and requires no installation. You can press F6 to stop the activity monitor network traffic, F5 to start again, or Ctrl + X to delete the network traffic statistics today.

Download NetworkTrafficView : http://www.nirsoft.net/utils/network_traffic_view.html

4:57 AM | 0 comments | Read More

How to Fix Wifi connection problem

WiFi is a matter of overcoming the problem of confusing if you are Windows XP and Vista machines, while Windows 7 has a built-in mechanisms tips that address all the issues and report to a specific page and find problem fixes itself when the WiFi connectivity. However, the Windows operating system provides a standard mechanism for problem solving, not as satisfactory as the third-party applications.

Xirrus WiFi Inspector is a powerful tool for managing and fixing Wi-Fi problems on Windows XP, Vista, or 7 laptop. Built in test allows you to display integrity and performance of your Wi-Fi connection.



Inspector Wi-Fi can be used for a number of practical applications, including:

• Searching for Wi-Fi networks
• Wi-Fi troubleshooting connectivity issues
• Verifying Wi-Fi coverage (site survey)
• Managing a laptop's Wi-Fi connection
• Locating Wi-Fi devices
• Detecting Rogue APs
• Verifying settings AP
• Aiming Wi-Fi Antennas
• Wi-Fi Education

After you install the Xirrus WiFi Inspector, it shows a dynamic radar display name Wi-Fi local network and the relative distance and the software provides a variety of connections such as quality testing, and test speed for troubleshooting Wi-Fi network connection. Other features such as graphics, real-time signal strength from one or more Wi-Fi network with a history 8 minutes.

Download Xirrus WiFi Inspector

http://www.xirrus.com/library/wifi_download_redirect.php

5:07 AM | 0 comments | Read More